Can’t remove stem from outdoor faucet? Well, the nuts have deteriorated. Due to that, it got frozen on the faucet. In these circumstances, we have different effective processes to remove the stem.
However, if you neglect the dripping faucet for a long time, it will cost you more. Not only the rising water bill but also piling water will cause harm to your home foundation and patch soil. See the effect of it.
So, take out the stem. But now the question how would you do it? Dive in to know in detail.
Can’t Remove Stem from Outdoor Faucet
Removing the stem from a faucet is not a crushing job once you know how to handle it. When your faucet becomes old, it becomes a bit tough to make a move.
Corrosion and over humidity environment are also responsible for it. The stem becomes so clingy over the faucet. Synchronously you can repair without causing any damage.
Have a look at the possible reasons-
|Worn out washer||Use Lubricant|
|Frozen Pipe||Remove Packing|
|Damaged Pipe||Fix the pipe|
|Over humid environment||Use Core puller|
When the washer is worn out, try to remove in this way. Strikeout packing all over the stem. The packing block the water to clear out when you tap on the water. Use a needle to get rid of packing. Unscrew the stem after that.
First Procedure: When Pipe Damaged
Step-1: Turn off the valve to shut the water line from the house. Rotate the handle in a clockwise way. Tap on the faucet to let go of the water pressure.
Step-2: Take out the screw from the faucet. Also, remove the handle attached to it. Spread the lubricant with the help of spray. Put it all over the nuts and handle. Give some time to soak the grease.
Step-3: Bring a wrench to adjust the nut. So rotate counterclockwise. If the nut fails to move, push it harder. But be careful, do.t break it. Due to corrosion, it becomes so fragile. So there is a chance to be broken.
Step-4: Hit slowly to the edge of the nut with the help of a hammer. Your attempt will liberate the corrosion or related things around the thread. Warm-up it by using a hairdryer. Hold it out for five minutes or more. The heat helps the nut expand, possibly an excellent way to lose material.
Step-5: By using a hacksaw, get rid of nuts. Once you make it out, uproot the faucet to remove the stem. The stem will get out this time.
Second Procedure: When Faucet is Frozen Corrosion or Worn out Washer
Things you must keep.
- Allen wrench
- Box wrench
- Half inch screw exactor
- Core puller
- Drill bits
Plumbing is all about running the plan efficiently. If the first methods fail, move to the second procedure. As a part of the job, you have to turn off the water and disseminate the handle.
- Turning off water: Look out the turn-off valve to make off position. The valve is about to set in 90 degrees toward the pipe.
- Disseminate handle: Take out the handle from the cartridge. Assemble the faucet based on your model. The bolt supports the handle. Find out the screw pattern from the holding location. With the help of Allen’s wrench, the screwdriver unlatch the handle. Make an effort to bring pliers for pulling out.
- Get Rid of Stuck Faucet: Eliminate the stuck faucet with the help of an efficient tool. Use a core puller to remove the faucet. This tool is specially designed for this job. Therefore, it’s available in the local store and online shop. The price is not much.
- Lubricating A Faucet Stem: By lubricating, you can get rid of a rusty bolt. Sometimes, the condition of rust is too bad. As a result, it makes it harsh to revolve. Lubricate it and give it some time to dissolve. Then, pull out the stem. It’s the most tactical way to dissolve rust.
Tips: If it fails, try to create your removal tool to uproot the stem. A better grip tool can give you luck.
Third Procedure: When There Is Over Humidity
Try this method when you can’t remove the faucet stem due to the humidity.
- Tap off the water to put a relive on the valve. No water pressure will be there.
- Unscrew the tiny screw to pull out the handle. You have to be careful enough to protect Philips recess. As it is from brass, there is a chance to get damaged.
- Eliminate the little nut covering the stem.
- Place the handle again temporally. In this way, the process of unscrewing the stem will get easier.
- If that doesn’t happen, take out the packing that covers the stem. The job of packing is to block water to get inside. Use a needle to get rid of it.
- After getting rid of packing, unscrew the stem effortlessly.
You May Like This Video Too!
Frequently Asked Questions (FAQs)
How Do You Remove a Stuck Hose from an Outdoor Faucet?
Take a hack saw to remove it. Do it vertically to oppose the threading material. Cut down the cracking part. Save the spigot portion. All these jobs will require 10 minutes. With the help of a flat screwdriver, finish the rest of the job. Pull out the cap and get rid of the stuck hose.
How Do You Remove a Valve Stem from A Faucet?
First, turn down the water supply and the faucet to release the pressure. Make sure that you cover the drain using a rag. Take out the handle by removing the screw. Remember the sequence of the screw. A lot of nuts have to be unscrewed. Then remove the valve. Replace it with a new one. Again reverse the screw work sequentially.
How do you remove a stem from a Sillcock?
Get rid of the handle at the start. Lose the nut by using piles. Now, you take out the stem and alternate with o ring. Next, detach the brass screw from the stem. Pick up the stem with a sizeable grip. Draw it out without any pain from Sillcock
Since you can’t remove the stem from an outdoor faucet, you have to follow an effective procedure. If you are unsuccessful in approaching failure, try the other one. You will be able to remove the stem from the outdoor faucet.
But diagnose the problem first. Once you figure out the real trouble, consider your job is half done. And rest follows your efficiency and tactics.
You Can Also Read: