How To Connect Two Dishwasher Drain Hoses: A Thorough Step By Step Guide
Housekeeping can be a little irritating, yes. But, if you don’t attend to maintenance much, the workload can only get larger. And, to help you narrow down your homeward tasks further, we bring you a concise guide on how to connect two dishwasher drain hoses.
While this guide primarily teaches you how to connect drain lines, it also shows you how to fix leaks at such connections and how to extend your drain hose further. If these things are on your to-do list, stay with us until the end to cross them off too.
How To Connect Two Dishwasher Drain Hoses
Adjoining two drain pipes to one discharge duct is elementary to plumbing tasks. So, you don’t need to have much plumbing experience to do it. Besides, we made this guide lucid. So, even if it’s your first time getting familiar with plumbing, we encourage you as always.
As for the equipment needed for the job, gather the ones we listed below. In case you are missing any of them, there is room for improvisation and creativity. And aside from the fittings, others will come in handy in many other situations. So, better get them from hardware stores.
Dishwasher drain connection Kits
- Channel Lock Pliers
- Soaking cloth
- Screwdriver (5/16”)
- Drain Hose Barb Union (Y connector or T barb)
- Dual dishwasher drain connectors or Two-way couplers
- Hose clamps for screw-free work
- Drainpipe extension hose
Assuming you have the tools necessary for the job, or substitutes, let’s begin with our step-by-step tutorial. It is organized into a few sections for your convenience.
Phase 1: Ensure Safety And Locate The Drain Hoses
- Compared with other plumbing projects, attaching drain lines is quite safe. But attend to your safety first and turn off the line of your Dishwashers and other adjacent appliances.
- Secondly, turn off the supply valve.
- Now locate the drain pipes you want to connect. They are usually channeled through cabinets. If you need to move the washer to get to the hose, remember to disconnect the wires and strain relief nuts inside the junction box.
- Spread towel under the drain lines.
- Take note of the diameter of each, although, the drain hose pipes are usually of universal size. Next, bring the two drain hose ends together and verify if they can touch each other without any extension.
- If they touch, proceed to the next section.
- If they don’t, extend the comparatively smaller drain duct.
- To extend the drain hose, attach the clamp and then insert the dishwasher drain hose coupler at the end of the smaller drainpipe.
- Then, wear the clamp again to the extension pipe and enter it into the open end of the connector.
- Tighten each clamp with a screwdriver and measure stress by mildly pulling the extension. Great, off to the next section now.
Phase 2: Connect The Drain Hoses
- Now that the drain hoses are within reach of one another Put clamps on their mouth.
- At the same time, put another clamp on the extension pipe too.
- Afterward, join the top branches of the Y connector with the drain pipes. Insert them far enough to snug the connection.
- Later, couple the bottom of the Y connector with the extension pipe, insert enough to make the connection tight.
- Consolidate the links tightening each clamp with a screwdriver.
- Feed the extension through the drain hole.
- Reposition the dishwasher if you had to move it and reconnect the wires in the junction box.
Phase 3: Check The Connections
- Now that everything is arranged and the fittings are seemingly rigid and safe, switch on the dishwasher and adjacent appliances.
- After that, turn on the water supply valve and activate the drain.
- Observe closely for any leakage. There shouldn’t be any, considering you’ve introduced right-sized connectors.
- However, if there is any leakage in the connections, using an additional rubber clamp over the connection will take care of it.
- That’s it, you’re done. Pat yourself on the back.
You May Like This Video Too!
Frequently Asked Questions (FAQs)
How do you connect two dishwasher hoses together?
You can connect two or multiple dishwasher hoses with Y connectors or couplers and hose clamps. However, you should undergo a few protocols to ensure a safe and sound connection procedure. You’ll find our full guide helpful in this case.
Can I extend dishwasher drain hose?
Yes, the drain hose does not require a definite PSI or flow rate to function at its best. And extending one up to three meters does not deter the potency of draining. So, you can safely extend your drain hose to reach a distance unobtainable otherwise.
Why does my dishwasher have two drain hoses?
A few models of dishwashers come with two drain hoses, and only one of them is connected to the garbage disposal line of your dishwasher. The other comes as a peripheral hose for replacing or extending the present drain pipe.
How to connect dishwasher drain hose to disposal?
If your disposal is new, firstly, you need to break the inlet seal of the disposal. Then, attach a clamp to the drain hose end and push it against the inlet until it is snug enough. Finally, tighten the clamp with a screwdriver. To safely maintain the process, connect the disposal after phase two of our guide and continue afterward.
Attending to the maintenance of your appliances can make you an accomplished homeowner. We, on the other hand, appraise such initiative and possibly, facilitate your chores. With that intention in mind, we completed our short guide on how to connect two dishwasher drain hoses.
Therefore, we will be delighted if we succeed in this small endeavor to aid you with homesteading. Thank you for being with us, as always. We hope to bring more instructive guides like this in the future. Until then, stay blessed and safe.
You Can Also Read: