Toilet Handle Hard to Push Down: 2 Mechanisms Can Help to Figure Out

Is your toilet handle hard to push down? Neither have an idea of the mechanisms plays inside nor of the fixing procedure? At first, check what the issue is, then go for the exact solution. The clog inside the toilet tank or a worn-out washer can cause the handle hard to flush.

Your toilet handle is the part that needs to work under high pressure and thus often gets stuck or becomes hard to push.

No need to worry, because this is one of the common problems that we are facing so often, and there are available remedies for it.

This article will showcase2 of the commonly used mechanisms for the toilet flush boxes. Find out which one matches your toiled box and fix it with our easy tutorial.

Toilet Handle Hard to Push Down

There are toilet flushers of different mechanisms, and thus there are different types of flusher handle. In this part, we have a list of different flush box mechanisms that you may have in your house.

 Besides, we have a brief discussion on how to fix a hard to push toilet handle for each type.

Get through the article thoroughly. Remember, one fixing solution might not be applicable for all of them. So, first, make sure which mechanism you can see in your toilet and then go for the solution.

READ ALSO  How to Protect Bathroom Floor from Urine with 4 Pro Tips

You can also check how to fix a toilet handle that doesn’t have a lift chain flapper mechanism?

Well, if you have a toilet that doesn’t have a chain flushing mechanism and has a flapper, then the mechanism it is using might be the lever control (conventional chain mechanism) or the pressure-assisted mechanism.

These mechanisms that do not contain a chain may provide a button on the top or side of the flush box, a flusher handle, or a lever. What if these are hard to push down? Let’s dive in.

Checking Hard Handle with the Conventional Chain Mechanism

A lever is attached to the flusher handle in one and to a rod in the other end. This rod then connects with the toilet flapper. When the handle is hard to push or broken, you will need to replace it or simply check inside the flush box if anything is stuck on the way. Here are some solutions,

  1. Open the lid of the flush box.
  2. Check if the tank is dirt free..
  3. Check out the handle nut as it could be rusty. If so, replace with a new one.
  4. Rotate the nut counterclockwise to unscrew (Use a pipe wrench if it seems too tight).
  5. See if the flapper and the connector rod can easily move. Make sure there are no obstacles.
  6. replace the handle if necessary (Broken or worn out).
  7. Check if the nut is set tight.
  8. Close the lid.

Notes: This lever cannot be too long or too short. It can break rapidly as made of plastic and has to work under high pressure.

Checking the Handle with Pressure-Assisted Mechanism

If you have a button on your toilet rather than a flapper, this mechanism is a pressure-assisted type.. To fix it, you will need to do,

  1. Disconnect the water supply to the flush box.
  2. Check the water level and pressure.
  3. Check if there is any debris.
  4. Make sure there is not any problem with the air intake inlet.
  5. Flow some water through the hole.
  6. If it is not sucked by the aperture, unscrew the cap.
  7. Clean the screen or replace it if damaged.
  8. Make sure that the aperture is pushing the rod onto the cartridge.
READ ALSO  The Standard Height for Toilet Paper Holders

This Video Will Help You Too!

Frequently Asked Questions (FAQs)

How do I fix a stiff toilet handle?

If you have a chained flush system, the issue must arise due to the chain being stuck. To fix it, the chain should be of the right length, and while flushing, the flapper should rise at least 90 degrees. Otherwise, the flapper won’t move quickly, and the chain will be stuck.

How do I know if my toilet flapper is bad?

There are 3 symptoms that prove that your toilet flapper is bad. You might notice that the toilet is continuously flushing itself, taking too long to fill the tank, or the water is not stopping. If any of these happens, then you need to change the toilet flapper.

Why do I need to jiggle the toilet handle?

when you jiggle the toilet handle, the chain connecting to the handle shakes out. It helps to release the stripped handle.

How do I make my toilet flush easier?

There are a few measures that can make your toilet flush easier. Firstly, make sure that it isn’t clogged. Check if the tank is filling up to the level. Also, keep it as clean as possible. You can apply bleach or vinegar.

Toto toilet handle hard to push, what to do?

It is a pressure-assisted mechanism-driven toiled flush handle. So, just follow the steps, same as a pressure-assisted mechanism flush box.

Final Words

Now in this part, we will summarize the entire content in brief for our picky readers. No time to read the entire process? Then take a look at these final words.

We have talked about two types of flushing mechanisms, and according to those, the handle of the toilet box differs. You may find a chain, flapper, button, or flush handle.

So, when the toilet handle hard to push down, first check which type of flush system it is, then move the lead to check inside if there is any debris.

If debris is not the issue, then replacing the handle might help. Call a plumber if necessary.

You Can Also Read:

Check out our Reusable Bamboora Paper Cloth Towels

While shaping the aim of making the environment clean and healthy, Bamboora deals with the production of natures way bamboo paper cloth towels. These bamboo towels are better for the environment.
Along with doing lots of plumbing work, they are usable for other house chores too. From wiping out the spill on the floor to cleaning the dust, bamboo paper towels effectively perform their work. They are effective in replacing regular cloth towels that you often purchase. The natural strength and softest fiber of bamboo make them one of the best sustainable bamboo paper towels.

Similar Posts