From turning off the water source to uninstalling the nuts and bolts, you need to follow only 2 steps when we talk about how to remove wall mounted toilet.
Believe it or not, taking off your existing wall-mounted toilet isn’t child’s play as many people these days are pretty familiar with the traditional toilet seats. However, it doesn’t mean that you have to break your back to get this work done. Simply read this whole article from head to toe, where we’ve included the most basic technique of removing your wall-mounted toilet through step-by-step instructions.
So, are you ready to learn how? Well, you’re just a step away!
How to Remove Wall Mounted Toilet – Step by Step Guide
Removing the wall-mounted toilet might be a little trickier, but not an impossible task at all! After getting some DIY ideas through this article, you’ll be able to do it yourself. So let’s see how to remove wall hung toilet.
Tools Needed While Removing the Toilet
- Slip-joint pliers
- Open-ended wrench
- Adjustable wrench
- Needle nose pliers
Materials Needed While Remove the Toilet
- Wax seal
- Toilet seat
- Few pieces of the water closet
- Toilet supply tube
Step 1: Turning Off the Water Source
Initially, while disassembling the toilet, make sure to turn off the water supply from the source. Now flush the toilet afterward to make sure there is no water. Use a sponge to soak in all the excess water from the tank and bowl. Disconnecting and detaching the water supply line is an important part that you cannot skip.
Step 2: Uninstalling the Nuts and Bolts
A wrench is required to uninstall carrier nuts and plastic washers, which are generally used to install the tank to the bowl.
Then raise the tank from the bowl so that you can remove the nuts from the four mounting bolts behind the tank. Afterward, you should be able to take off the bowl. You will spot an old gasket installed on the wall, and this is what you need to remove.
How to Remove a Commercial Wall Hung Toilet?
Disassembling a wall-hung toilet from a commercial place is much easier than removing it from a residential home because residential homes have toilet tanks, but commercial buildings do not.
The rest of the procedures are the same as the residential system. But make sure if you shut down the water source of one toilet, then only that water line will stop.
In this case, if you are working with more than one toilet, it is better to turn off the whole building’s primary water source in order to get the work done.
Last but not least, you should at least have minimal plumbing knowledge to get such work done. Go ahead if you’re familiar with it. But if not, there’s a possibility of damaging your product and resulting in disappointment.
This Video Will Help You Too!
Frequently Asked Questions (FAQs)
How Are Wall Mounted Toilets Supported?
Needless to say, wall-mounted toilet can be a better choice to save space and make cleaning effortless. In order to support mounting toilets, tank keeps hidden from view. Wall-hung toilets are expensive but do not need to cut the floor to adjust the drain for installation.
Where is the Tank on a Wall Mounted Toilet?
Talking about the wall-mounted toilet, it needs to keep the tank hidden behind the drywall. So it keeps inside the framing, and since the toilet bowls are on the ground, it will make cleaning much easier and quick.
How Do You Remove a Wall Mounted Toilet Flush?
It depends on the toilet itself. Every company has its own design. But if you want to get general knowledge on how to remove wall mounted toilet flash, you should be able to use a wrench or screwdriver to unscrew the bolts. Or sometimes, there might be plastic flaps which you can pry open using a sharp edge tool. But don’t forget to turn off the water source for the toilet first.
Without knowing all the procedures, if you try to remove the wall-hung toilet by yourself, you might accidentally cause severe damage to the bathroom. This way, you’re going to do nothing but ruin the whole aesthetic of your bathroom!
As a result, if you read this article from top to bottom, you will know how to remove wall mounted toilet safely and effortlessly. At first, it may look challenging, but if you follow all the rules step by step, this may turn way easier than you think.
You Can Also Read:
- How To Remove Toto Flapper
- Working with Proper Toilet Flange Height Knowledge is Crucial
- How To Remove TOTO Toilet Seat Within Minutes
- How to Shim a Toilet on Uneven Tile: Ways for Leaky or Non-Leaky