Stop Your Outside Faucet Leaking When Hose Attached: Easy and Simple Fix

Nurturing the lawn is quite a toilsome work. It only gets harder when you see your outside faucet is leaking when the hose attached. To be honest, this is bound to happen when the hose is damaged, or the rubber washer is weary. The leaking hose problem is common for gardeners or anyone who’s got an outside hose.

But… Guess, what? Getting rid of this trouble is easier than you thought!

In most cases, you can solve this problem on your own and that too without any hardship. Also, it will be effectively cheap and fast.

 Let’s have a look at the easy and simple ways to fix a leaking hose connector.

Fix When The Outside Faucet Leaking When Hose Attached: Easy Guide

A leakage in the water hose connector is irritating and causes a great loss of natural resources like water. So, it is wise to fix the issues as fast as possible.

Once you find the reason behind your leaking hose connecter, you’ll be able to mend it in no time!

Let’s have a look at these possible reasons and their fixes.

ReasonsHow to fix
Weary rubber washerReplace with a new washer.
Damaged hose endRepair the hose end.
Faucet troubleCheck the faucet to fix the problem.

Once you’ve detected the reason for your leaky hose connector, move on to the fixing process.

READ ALSO  Flooding, Waterlogging, And Other Shower Drain Offset Problems & Easiest Ways To Fix

How to stop Water Hose from Leaking at Faucet

If you notice the water leaking at the connection of the faucet and the hose, probably it’s because of the rubber washer. Most of the time, changing the rubber washer sorts out this problem completely.

A rubber washer’s job is to help the parts connect with each other tightly and prevent the water from coming out. The water will start to leak if there’s any damage in the washer or it’s absent from its place.

To fix this problem, you’ll need to detach the connector from the faucet and have a look at the washer. If the washer is worn out or defective or gone, you need a new one.

Rubber Washers are Easily Available in the Supply Stores and Online

Now, take a set of nose pliers and take out the worn-out washer from the connector. Put the new washer in place and press it gently with a screwdriver to make sure it’s sitting properly. Be careful with the screwdriver, you don’t want to damage your new washer!

After the washer is placed correctly, connect the hose with the faucet. Turn on the faucet and check if the water leaking problem goes away!

Outdoor Tap Leaks When Hose Attached: Damaged Hose End

The reason your outdoor tap is leaking water whenever the hose is attached might be a damaged hose end.

If the end of the hose is worn out, torn, or has any holes, it will continue to spill water.

But a damaged hose end doesn’t necessarily mean that you need a new one. If the only damage is on the end side, it can be repaired.

For that, you’ll need to cut off the damaged part. Make sure the cut is even and smooth. Then, place the connector part in the newly cut hose end. Wearing gloves will give you a better grasp.

READ ALSO  Use This Laundry Sink Plumbing Diagram to Set It Up!

After setting the part properly, secure it with a metal clasp. This will ensure that the hose is attached to the connector tightly.

Before linking the connector, use a few rounds of the plumber’s tape on the faucet end. It will help the connector to grip better and eliminate the chance of leakage.

Outdoor Faucet Leaks When Hose Attached: Faucet Trouble

Water leaking from your outdoor faucet may be due to some dysfunction in the faucet, not in the hose.

To determine that, detach the hose from the faucet and turn it on. If you notice water leaking from under the spigot, the faucet needs repair.

Usually, the culprits behind these types of issues are the packing nut and the rubber washer.

Also Read: Why Toilet Refill Hose Keeps Coming Out: Explained with Fixes

A loose nut can cause the water to leak. So, if you just fasten the nut with the help of a wrench, the leaking may stop. If it doesn’t, take out the nut and put some plumber’s tape on it for a better grip. And then, fasten the nut in place again.

The leaking problem will also occur when your faucet has a worn-out washer. You’ll find the washer behind the stem valve’s screw. Replacing the washer with a new one will save you from the water leaking trouble.

This Video Will Help You Too!

Frequently Asked Questions (FAQs)

How do you fix a leaky tap connector?

You can fix a leaky tap connector in most cases by replacing rubber washer. Make sure the rubber washer is of the right size. Using plumber’s tape helps the connector to have a better grip.

Do push to connect fittings leak?

It is quite unusual for the push-to-connect fittings to leak. But it might happen because of a faulty installation process, defect, or any kind of damage.

Wrapping Up

One might think that outside faucet leaking when hose attached is not something that can be easily fixed. But now you know that it’s an entirely wrong idea!

When the issues are the basic ones discussed in this article, almost anyone can solve these problems with a bit of skill and knowledge.

Following these quick fixes will help you save money and time. Mainly, it will save the water from wasting away.

You Can Also Read:

Check out our Reusable Bamboora Paper Cloth Towels

While shaping the aim of making the environment clean and healthy, Bamboora deals with the production of natures way bamboo paper cloth towels. These bamboo towels are better for the environment.
Along with doing lots of plumbing work, they are usable for other house chores too. From wiping out the spill on the floor to cleaning the dust, bamboo paper towels effectively perform their work. They are effective in replacing regular cloth towels that you often purchase. The natural strength and softest fiber of bamboo make them one of the best sustainable bamboo paper towels.

Similar Posts