How to Hang a Mirror Without Hooks on The Back

Do you have any idea how to hang mirrors without hooks on the back? There are various options to opt for, such as using a hanging strip for a light mirror or a bracket for the heavy one can be efficient.

A well-placed mirror can make a room brighter by reflecting the light around the room. But hanging a mirror is a difficult task and can damage the mirror and your precious wall.

So, this article will showcase the steps for hanging mirror that has no hooks, no matter if it is a lightweight or heavily weighted mirror.

How to Hang a Mirror Without Hooks on The Back

The procedures for hanging a mirror without hooks on the back depend on many things like the mirror’s weight, and which equipment you have if the mirror comes with frames or not. For this reason, we have segmented the procedure into 2 parts. Ome for the lightweight mirrors, and other for heavyweight mirrors.

So, explore!

How to Hang a Lightweight Mirror Without Hooks on The Back

You can try these 2 methods for hanging lightweight mirrors, one using glue or tape and another using strip.

Method – 01: Using Glue/Tape

For lightweight mirrors, know first how to hang mirror on wall without nails.

1. Measure the wall

The first srep is to measure your mirror. Then, compare its size to a piece of art or a focal point on a wall in your home. If your mirror weighs less than 15 pounds, you will be able to hang it using glue instead of nails or screws.

2. Prepare the walls for mastic

To make sure your wall receives a smooth mastic application, apply strips of J-channel to the walls in advance. Then attach these channels to the back of your mirror using double-sided foam tape.

3. Attach double-sided foam tape on the back of the frame

Apply additional strips of small sticky pads along the length of both sides of the mirror. It will add a solid grip to the bottom of your mirror while keeping the top free from any adhesion materials.

4. Set up an area for hanging

Open up all of your mirrors and lay them out in an open area with enough room for applying mastic. It’s essential to use an open space with plenty of ventilation because you’ll be using industrial-strength adhesive that can fill rooms with toxic fumes when it begins to set.

READ ALSO  The Sliding Door Rough Opening Chart: Quick & Easy Guide

5. Apply the mastic to the wall

Be careful not to apply too much mastic, as it can drip down the sides of your mirror and create a mess on your floor or tabletop during application. Spread enough adhesive around so there is a soft mound under the frame where you will apply it.

6. Attach the mirror to the wall

Take your mirror and lay it face down on top of the mound you created with mastic. Ensure where your studs will locate in the wall and what type of anchoring system you plan to hang your mirror.

You can then flip over your frame and apply gentle pressure to adhere it into place. It will take a few minutes to set completely. Try not to move it around too much, or it will loosen.

7. Remove J-channels and clips

After your frame has adhered into place, you can now mark where you plan to nail your hardware. With your J channels already attached to the back of your frame, you can easily slide it out without moving or damaging your adhesive. It is now ready for hanging using nails or screws.

Method – 02: Using Strips

Follow the steps below to hang a lightweight mirror using strips.

  1. Measure the mirror’s width; this is useful in determining how long to cut the command strips.
  2. For hanging heavy mirror with command strips cut them into pieces proportional to the measurement taken in step 1. For example, if the mirror is 2 inches (5cm) wide, cut the command strips into two pieces that are also 2 inches (5cm) long.
  3. Repeat step 2 with the length of the command strips. Make sure that the pieces are proportional to the mirror’s size, not width.
  4. Allocate two pieces of command strips for each mirror edge. Make sure that the pieces will be attached to opposite edges, as this prevents them from interfering with each other.
  5. Place down a piece of newspaper and place the mirror onto it. It protects the surface you’ll be using for gluing and makes cleaning up easier.
  6. Attach one end of each piece of command strip to an opposing side of the mirror, then attach the other end so these two pieces meet at a 90-degree angle. Repeat this step for all four sides. Ensure that there remains enough distance between both parts, so they don’t interfere with each other when applied to the wall.
  7. Cut off any excess hanging loops from both ends of command strips.
  8. Now, apply a thin layer of glue on both the backside of the mirror and on the wall, wait for 7 minutes until it becomes tacky.
  9. Attach the two ends of each piece of command strip to the wall using sticky tape, then wait for 15 minutes until the glue hardens. Repeat this step if additional layers.
  1. Hang up and enjoy your new hanging mirror.
READ ALSO  Bladder Tank Vs Pressure Tank – 4 Things Made them Different!

How to Hang Heavy Mirror Without Hooks on The Back

Some heavy mirrors come with a frame, and some are not. The mirrors without frames use mirror clips. On the other hand, mirrors with frames use brackets to hang on a wall.

Method – 01: Using Mirror clips if the mirror does not come with frame

A mirror clip is used to hang a heavyweight mirror that does not come with the frame.

  1. Determine the weight of your mirror that is without a metal frame or glass. The type of clip you will need depend on how much the heavy-duty hangers can hold up. This number is called weight capacity and not just by looking at them, so be sure to check it before buying any clips for hanging a heavyweight mirror without frames.
  2. The two typical mirror hanging systems are the hooks and screws, which you can depend on any wall (drywall or brick). The problem with using screws is that too much weight may cause it to loosen due to constant moving or bumping. However, you can use both screws and hanger hardware for extra securing purposes.
  3. Measure the mirror’s width, then mark on the wall with a pencil where its top edge position. Then measure the left and right sides of the mirror, mark them down on the wall apart from each other by 2 inches. Then measure the bottom edge of moving images, mark it down also on the wall two inches away from the top part. Use a level tool or line gauge to ensure that all three marks are even at the same height off the ground.
  4. Drill the holes inside each marked location with drill and 6mm diameter hole-saw bit; insert wall anchors in each hole, then use nails or a screwdriver to push them in place securely. Insert the end of the mirror clip into any one of the three wall mounts, make sure they are facing frontward position.
  5. Repeat the above step for all three mounting points; tighten screws until it has bottomed out. Then hang it by pushing it down to secure its position.
  6. Now, hang the heavy mirror on the wall. Decorate as desired.

Method – 02: Using hanging brackets if the mirror comes with frame

A bracket is used to hang a mirror that comes with a frame.

  1. If your mirror has 3 cross brackets on the back, you can hang it vertically or horizontally. Only two of the three brackets will require for this operation.
  2. Check the distance between the holes in the brackets. Make sure to keep track of the distance between the brackets and the top of the mirror, which will ensure that the mirror hangs appropriately.
  3. To attach the screws, measure the distance between the two brackets and use a level to mark it.
  4. With a screw and a hammer, lightly pierce the wall. After the wall has been drilled, insert the screw with a screwdriver. To make larger holes, remove the screw.
  5. Insert the anchor carefully and slowly into the holes with a hammer. Place the screw into the anchor with a screwdriver, leaving about a quarter of an inch protruding.
  6. Now, it is ready to hang the mirror.

This Video Will Help You Too!

Frequently Asked Questions (FAQs)

How do you hang a mirror with no back hooks?

You can use either glue/tape or strips for lightweight mirrors. And for heavyweight mirrors that came with a frame, you can use brackets, and for the mirror that did not come with a frame, you can use mirror clips for hanging.

Can you command strip a mirror?

Yes, command strips can be used on mirrors, whether the surface is drywall, metal, stained wood, cinder block, or plaster surfaces.

What can I use to hang a heavy mirror without nails?

Drywall hooks can be used to hang a mirror on your drywall or plaster without using nails.


There are many ways of hanging a mirror, from using hooks, nails, or adhesive strips to balancing it on a shelf. Whatever methods you use, you must ensure that the mirror stays in position and doesn’t fall. Without a proper guideline, there is a chance of damaging your wall as well. Take extra precautions and ideas of how to hang a mirror without hooks on the back.

You Can Also Read:

Check out our Reusable Bamboora Paper Cloth Towels

While shaping the aim of making the environment clean and healthy, Bamboora deals with the production of natures way bamboo paper cloth towels. These bamboo towels are better for the environment.
Along with doing lots of plumbing work, they are usable for other house chores too. From wiping out the spill on the floor to cleaning the dust, bamboo paper towels effectively perform their work. They are effective in replacing regular cloth towels that you often purchase. The natural strength and softest fiber of bamboo make them one of the best sustainable bamboo paper towels.

Similar Posts